Wondering how a sensor can pick up the faint magnetic signals of a beating heart? Quantum sensing uses atoms and superconducting circuits to measure magnetic fields much more sensitively than classical tools such as a compass.
This page is part of the site’s coverage of quantum technology, where sensing is one strand among several.
| Item | Value |
|---|---|
| SQUID sensors invented | 1960s and 70s |
| Facilities housing SQUID-powered units | Only a few hundred worldwide |
| Atom-based sensor types in a 2025 review | Three sensor modalities |
| Frequency range of atom-based sensors | DC to THz |
| Spatial resolution range | Nanoscale to meter scale |
| Review published | December 19, 2025 |
The figures come from NIST’s “Sensors for a Magnetic World” page and NIST’s listing of a December 2025 Optica review. Figures can change, so check the source before you rely on them.
How quantum sensing differs from classical instruments
A classical magnetometer, such as a compass or a flux gate magnetometer, can be good enough in some situations. According to NIST’s Quantum Sensing Explained series, quantum magnetometers are much more sensitive. That extra sensitivity is what opens up new applications.
A December 2025 review in Optica, written by Dmitri Budker, James Shaffer and John Kitching, makes a similar point about atoms. As NIST’s record of the review puts it, such sensors offer unique advantages compared with classical approaches, resulting from their intrinsic quantum nature.
Why magnetic fields are worth measuring
Magnetic fields are everywhere, and measuring them can yield powerful data. NIST gives a few of the sources:
- Earth’s iron core generates a field that surrounds the planet and protects us from charged particles from outer space.
- Electric currents in wires create magnetic fields.
- The electrical signals in our nerve cells create them too.
Those fields feed into very different jobs, as described on the same NIST page. Here are the main uses it lists:
- Materials research: scientists measure fields from superconductors and other materials to design advanced technology and electronics.
- Biomedicine: researchers measure the tiny fields from brain cells and from the electrical currents that control the heart’s beating.
- Geology: geologists measure magnetic minerals in rocks to study how Earth’s field has evolved over the planet’s long history.
- Navigation: militaries around the world hope to use measurements of Earth’s field to navigate without reliance on GPS.
SQUIDs: superconducting loops that act as antennas
In the 1800s, scientists discovered that electric current creates a magnetic field and that magnetic fields in turn induce current. Building on that insight, scientists in the 1960s and 70s invented the superconducting quantum interference device, or SQUID, as NIST explains.
A superconductor is a material that, when cooled to extremely low temperatures, allows electricity to flow without resistance. To make a sensor, scientists shape it into a small loop and insert insulating barriers. A magnetic field then makes the current split and interfere with itself at the barriers, so the total current oscillates, and a stronger field gives larger oscillations.
That is why a SQUID is so sensitive: the loop works essentially as an antenna that amplifies tiny changes into detectable signals.

What SQUIDs are used for
SQUIDs have given scientists new ways to detect extremely weak magnetic fields generated in the body. Magnetoencephalography (MEG) helps doctors pinpoint diseased or damaged tissue in the brain and can guide surgeons during operations for conditions such as epilepsy.
NIST adds that magnetocardiography (MCG), first demonstrated at NIST, has been tested for detecting fetal heart signals. Scientists hope to eventually use quantum magnetic sensors to monitor fetal heart health noninvasively during high-risk pregnancies.
Outside medicine, variations in Earth’s field measured with SQUIDs have led to major mineral finds, ancient sites buried under soil or vegetation, and unexploded ordnance. SQUIDs also read out transition-edge sensors, which astronomers use to measure faint microwave light from the beginning of the universe and physicists use to search for dark matter.
The catch: bulky refrigerators
SQUIDs need bulky and expensive refrigerators to reach the temperatures at which superconductors operate. For that reason, NIST says, only a few hundred medical and research facilities around the world house SQUID-powered MEG units.
Atom-based sensors: three routes to sensitivity
Because of those limits, scientists hope magnetic field sensors based on atoms can overcome some of the challenges, according to NIST. The December 2025 Optica review, listed on NIST’s publications page, covers three sensor modalities:
- atomic vapor magnetometers;
- NV-center magnetometers, which rely on nitrogen-vacancy centers;
- radio frequency sensors based on Rydberg atoms.
The review’s abstract says the spin and electronic degrees of freedom in atoms can detect electromagnetic fields from DC to THz frequencies. Spatial resolutions range from the nanoscale to meter scale, and the authors stress real-world applications.
Where quantum sensing fits among other quantum fields
Sensing is only one part of the wider field, and the sources used here deal with sensors alone. If you want a different branch, the guide to quantum communication is a good next read.
Security questions form another topic, which the guide to post-quantum cryptography explains.
Frequently asked questions
What is quantum sensing?
Show answer
It is the use of quantum physics in sensors, such as SQUIDs and atom-based magnetometers, to measure fields with much higher sensitivity than classical instruments like a compass.
Is a quantum sensor always better than a classical one?
Show answer
No. Simpler tools can do the job in some situations, so the quantum versions earn their place mainly where extra sensitivity is needed.
Why aren’t SQUID machines everywhere?
Show answer
The cooling hardware is the obstacle. Superconducting loops only work when chilled to extremely low temperatures, which adds size and cost, and that helps explain why such machines remain rare.
Can magnetic sensing help navigate without GPS?
Show answer
It is an aim, not a finished capability. NIST says the idea is to use Earth’s own field as a reference so that navigation no longer depends on GPS.



